SC450 Series: Single Parameter Colorimeters
Gallery: Click on the photos to view and later close the slideshow
The SC450 Series is the newest additon to Orbeco-Hellige‘s line of single parameter colorimeters. New parameters are being added all of the time, so be sure to check out our website for a complete list of available parameters.
Technical Specifications
|
Interfaces
|
Infrared interface for test data transfer1 |
|
Optics
|
LEDs, Interference filters, and photo sensor in a transparent sample chamber. Depending on the version of the instrument, up to 3 different interference filters are used.
Wavelength range: 1 = 430 nm IF ∆λ = 5 nm 2 = 530 nm IF ∆λ = 5 nm 3 = 560 nm IF ∆λ = 5 nm 4 = 580 nm IF ∆λ = 5 nm 5 = 610 nm IF ∆λ = 6 nm 6 = 660 nm IF ∆λ = 5 nm IF = interference filter |
|
Wavelength Accuracy
|
± 1 nm |
|
Photometric Accuracy*
|
3% FS (T = 68 – 77°F) |
|
Colorimetric Resolution
|
0.01 A |
|
Operation
|
Acid and solvent resistant, touch-sensitive key pad with audible feedback |
| Power Supply | 4 batteries (Size AAA ;
Operation time: approx. 17 hours continuous operation or 5,000 tests |
| Auto-Off | approx. 20 minutes after last key press with audible signal |
| Dimensions
(L x W x H) |
Instrument: 6.1” x 3“ x 1.5” |
| Weight (unit) approx. | 1/2 lb (260 g) |
| Operating Conditions | 41– 104°F
30 – 90% relative humidity non condensing |
| Display | backlit LCD |
| Memory Capacity | 16 data sets with date, time and stamp |
| Certification | CE |
* tested with standard solutions
