$695.00
For 110v 50/60Hz
795.00
For 220v 50/60Hz *
795.00
Accessories
for Models 966-01 and 966-02:
$60.00
60.00
14.00
46.00
159.00
| 966-01 | Portable Turbidimeter Outfit complete with No. 966-51 pkg. of zero and 40 NTU Standards, No. 965-50 pkg. of 6 Sample Tubes, 4 AA batteries, instruction manual and No. 966-CC Rugged Foam-lined Carrying Case.* |
$695.00
|
| 966-R1 | Same as 966-01 above, with carrying case, recorder output
and with regulated AC Adapter. For 110v 50/60Hz |
795.00
|
| 966-R2 | Same as 966-01 above, with carrying case, recorder output
and with regulated AC Adapter. For 220v 50/60Hz * |
795.00
|
|
Accessories
|
||
| Optional Regulated AC Adapters, for Models 966-01 and 966-02: |
||
| 966-AC1 | Regulated for 110v 50/60Hz |
$60.00
|
| 966-AC2 | Regulated for 220v 50/60Hz |
60.00
|
| 965-50 | Optically Selected Glass Sample Tubes, pkg. of 6 |
14.00
|
| 966-51 | Set of Zero and 40.0 NTU Standards |
46.00
|
| 965-56 | Flow-through Cell, for continuous recording with Models 966-R1 or R2 |
159.00
|
| 965-10A | Model 965-10A Direct-reading Turbidimeter, complete with No. 966-51 pkg. of 0 and 40 NTU primary standards, No. 965-50 pkg. of 6 Sample Tubes, and operators manual. Switch-adjustable for 110/220v 50/60Hz operation, and (with optional No. 9994 Converter listed below) with any 12vDC auto or boat battery.* |
$995.00
|
| 965-10AR | Model 965-10AR Turbidimeter, same as above, but with recorder output terminals for 0-1v, 0-5ma, adjustable for 10K ohm or higher impedance.* |
1,025.00
|
|
Accessories
and Replacement Parts
|
||
| 965-56 | Flow-through Cell, for continuous reading of pumped or flowing samples. Flow rate 1-2 Liters/minute. 0-5 psi. Has ³self-cleaning² design. For continuous recording use with 965-10AR Turbidimeter. |
$159.00
|
| 9994 | Voltage Converter, for portable use from any 12v auto or boat battery. |
110.00
|
| 965-59 | Carrying Case, watertight, compact water resistant, foam lined. Holds turbidimeter, converter, 6 sample tubes, calibration standards. |
245.50
|
| 965-50 | Sample Tubes, with screw-caps, Box of 6. |
14.00
|
| 965-65 | Sulfate Testing Outfit, for 0-210 mg/L SO4 range. |
41.00
|
| 965-55 | Replacement Well Cap |
7.00
|
|
* For CE certification, add ³CE² to model numbers
|
||
| © Orbeco Analytical Systems, Inc.
All rights reserved. All trademarks are owned by the respective company or Orbeco Analytical Systems, Inc. |
