COD TESTING with the
975MP Analyst


The Analyst Model 975MP, Tube Adapter Model 975-TA,COD Reactor 		 


Orbeco-Hellige's micro-COD Method, when performed with The Analyst, offers low-cost, simple Chemical Oxygen Demand testing fully compatible with USEPA 410.4 and Standard Methods 5220.
Uses convenient 16mm diameter screw-cap tubes containing a specific oxidizing agent. The tubes, containing reagents and samples, are heated at 150°C for 2-hours (or less under certain conditions) and then are inserted into the 975 TA adapter in The Analyst for a direct test reading. The 2 hour time period is mandatory for EPA approved methods, but COD readings for non-reporting purposes may be obtained in as little as 15 minutes for readily oxidized wastes.

    Features of the Orbeco-Hellige micro-COD Method
  • Up to 75% savings over other methods.
  • Full compatibility with EPA 410.4 and Standard Methods 5220.
  • Mercury-free reagents.
  • Superior optical quality glassware for more consistent results.
  • Lower waste disposal cost
TUBE ADAPTER
 Tube Adapter 975-TA
 For the Analyst to accept 16mm diameter COD tubes.		  

Return to COD Testing
 
 
© Orbeco Analytical Systems, Inc. All rights reserved. All trademarks are owned by the respective company or Orbeco Analytical Systems, Inc.